top of page

​

This spotting guide below will assist you in removing small, everyday household spills while minimizing the risk of permanent damage to your oriental rug. Most over-the-counter spotters are formulated for synthetic carpets and are too aggressive for use on natural fiber rugs and should be avoided. 

 

​

Key Takeaways

​

  • Spots, if treated improperly, are more likely to become permanent stains and even damage your fine rugs

  • Having the right tools and solutions, like portable spot cleaners and gentle cleaning agents, is crucial for effectively treating specific types of stains without damaging the material.

  • It’s important to act fast, use appropriate cleaning techniques for different stains, and finish with proper drying to avoid residue and prevent the stain from setting in.

  •  this spotting guide will assist you in removing small, everyday household spills while minimizing the risk of permanent damage to your rug.

​

When in doubt, or if a spot does not respond to your treatment or you are unsure how to proceed, contact our professionals for expert advice.

​

Most over-the-counter spotters are designed as a one-size-fits-all solution and are inappropriate to use on many rugs. They contain concentrations of detergents, enzymes, and bleaches that can damage your rug and set what could have been a removable spot for additional discoloration of your rug. Therefore, we DO NOT recommend using multi-purpose over-the-counter spotters on your rug. The longer a spill remains on your rug, the more likely it is to stain, so the best time to attempt to remove any spills is immediately after they occur. 

​

  1. Blot up spills immediately. It is important to remove as much of the excess material as quickly as possible. Using a clean, white towel, press down on the stain, working from the outside of the spill to the middle. Blot, don’t rub, scrub or brush because rough treatment will damage the fibers. 

  2. Remove any solids with a plastic spoon or credit card.

  3. Pre-test any spotting solution in an inconspicuous area. Test cleaning formulas on an unseen place, like the back of your rug. If dye from your rug comes off, or if the rug changes color in that area, you should NOT use this solution. WARNING: using improper cleaning solutions can set spots and cause discoloration that may not be visible until the rug is thoroughly cleaned and rinsed.

  4. Don’t over-wet. Use small amounts of liquids. Overwetting can cause the stain to spread.

  5. Less is More. Use cleaning solutions sparingly. Excessive use of strong chemicals can damage your rug and compound the problem.

  6. Use patience. Some spots respond very slowly. It’s better to take a little time when treating a spot than have to look at bad results for years.

  7. Rinse out any chemicals. If you used a cleaning solution, be sure to blot it up and follow up by blotting with a damp cloth. Leaving soap in your rug can cause the spot to reappear due to rapid re-soiling. 

  8. DRY THE SPOT THOROUGHLY. Prolonged moisture can cause mildew and damage to your rug. Check back after a half day to make sure that the area is dry. If not, place a fan blowing directly on the spot until dry. If the rug has not dried in two days, consult your ARCS cleaner.

  9. When in doubt, contact your local ARCS member for assistance. If a spot does not respond to your treatment, contact our professionals for their expert advice. 

​

Use each cleaning agent on the spot or spill in the order indicated until the spot fails to improve. Apply small amounts of the cleaning solution with a clean, white absorbent towel never use dyed towels as color could transfer. Blot frequently and continue to apply and blot until the material is no longer transferred to the towel. The final step is to blot up any remaining moisture by pressing or padding the area with an absorbent towel and weighing it down. Allow several hours to completely dry.

​

SPOTTING SOLUTIONS

  1. Apply a small amount of cold water and blot with a dry towel

  2. Mix 1/2 teaspoonful of hand dishwashing detergent ( Do NOT use bleaches containing detergents) with a cup of cold water. DO NOT use laundry detergents. Automatic dishwashing detergents or over-the-counter carpet spotting products.

  3. Mix 1/3 cup of white distilled vinegar with 2/3 cup cold water.

  4. Apply a small amount of clear rubbing alcohol. Use in very small amounts to avoid damage to your rug. THIS IS NOT ADVISABLE ON LATEX BACKED OR TUFTED RUGS. Ensure proper ventilation before using any volatile solvents, like rubbing alcohol.

  5. If the spot is not removed, consult a professional.  

​

 

SPOT REMOVAL STEPS

  • Beer 1,2,3,

  • Blood 1,2,3,5

  • Butter 1,2,5

  • Candle Wax 4,5

  • Chewing Gum 4,2,5

  • Chocolate 2,3,5

  • Cocktails 1,2,3,5

  • Coffee / Tea 1,2,3,5

  • Cosmetics 54,2,5

  • Crayons 4,2,5

  • Egg 1,2,,5

  • Food Coloring 5

  • Fruit Juices 1,2,3,5

  • Furniture Polish 2,4,3,5

  • Furniture Stain 4,5,

  • Glue,(Elmer’s) 2,4,5

  • Glue (Carpenter’s) 2,4,5

  • Glue (Contact Cement) 4,5

  • Grease 2,4,3,5

  • Ice Cream 1,2,3,5

  • Ink 4,2,5

  • Ketchup 1,2,3,5

  • Milk 1,2,3,5

  • Mustard 2,3,5

  • Nail Polish 4,5

  • Oils 2,3,4,5

  • Ointments 2,3,4,5

  • Paint (latex) 1,4,5

  • Soft Drinks 1,2,3,5

  • Tar / Asphalt 4,5

  • Urine 1,2,3,5

  • Vomit 1,2,3,5

  • Wine 1,2,3,5

​

 

Disclaimer: These are best practices but are NOT applicable or appropriate for every rug type or situation. The END-USER IS SOLELY RESPONSIBLE for determining their suitability for their situation and the consequences of their use. Some spots, such as Ink and urine, are difficult to remove in a home setting and are best dealt with by a professional in a cleaning facility.

​

​

Carpet and rug spot cleaing
Caring for your rugs: Service

Area Rug Spotting Guide 

P1001140-min_edited.jpg

Our Service Area 

Renaissance provides cleaning & repair services to the Portland metro area and beyond 

HIllsboro

Aloha

bottom of page